The characteristics and principle of hot gas flowmeter are introduced

With the continuous progress of science and technology, all walks of life have also been greatly developed, about the hot gas flowmeter its development prospect is very good, so the demand is increasing, the market has also increased a lot of manufacturers, and we, as the manufacturer, here is also very necessary to tell you about his little knowledge, If you are interested, you can take a look.

Before we use this thermal gas flowmeter, there are many problems accompanying you, so to better use it, we need to understand some knowledge points of it. You should be aware that the thermal gas flowmeter is easy to install, easy to maintain, bidirectional detection, anti-vibration, and it is also characterized by its many to 24 point flow measurement, and when in use you will find its output analog calibration multi-point nonlinear curve correction, and its wide range ratio of 100:1. So it is favored by everyone.

The flow and temperature of the hot gas flowmeter are detected at the same time. In addition to these words also reflected in its large caliber small flow measurement, can do leak detection. And are also the use of proprietary technology "dual balance structure" packaging sensor. So it has a proprietary high humidity, high temperature algorithm, medium temperature up to 500℃, and the hot gas flowmeter its direct mass flow detection, without temperature and pressure compensation.

So you don't have to worry about that at all. If you have time, you can come to the official website to check it. There are ways to contact you. There are online customer service staff to receive you. After understanding the characteristics of the hot gas flowmeter, we will take a look at its working principle. In fact, the hot gas flowmeter is mainly based on the principle of thermal diffusion and design of flow meters. In this case, it is the use of fluid flowing through the hot object, heat loss of the hot object and fluid flow is proportional to a certain relationship. If you don't already know how it works, you can learn about it here.

The sensor of the thermal gas flowmeter has two standard RTDS, one is used to do the heat source, of course, one is used to measure the temperature of the fluid, when the fluid flows, so you need to understand that the temperature difference between the two is linear relationship with the size of the flow, and then through the micro-electronic control technology, of course, you can convert this relationship into the linear output of the flow signal.

At present, for the wide application of thermal gas flowmeter in daily life and its better and better production technology, but also let us believe that there will be more and more manufacturers to join in, then we need to see more, more comparison.

After the introduction of the above content, we also know the characteristics of the hot gas flowmeter and its principle. I hope you can have a further understanding of it after reading, if necessary, please feel free to contact us. Its advantages will be explained to you next time.